200 Litre Evacuated Tube Solar Hot Water Heat Exchange System

1.AS/NZS 2712:2007 AS3498 AS/NZS4692.1 2.Watermark 3.Tube resists 25mm hail. 4.High quality and reasonable price

pressurized solar water heater data :

SS serials is Thermosyphon solar water heater, That is a kind of solar water heating system that solar collector and storage are connected together with the cylinder storage on the top and collector panel on the bottom. There is no need of pump to push the fluid and no need of pipeline between the collector and storage. It is a simple and safe solution

to get heat power from the sun.

This type of solar water heater provides mains pressure pre-heating via a highly effective copper coil heat exchanger located within the solar collector tank. The way in which the mains pressure solar collector heats water is the same as the non pressure solar collector.Rather than using the water in the tank directly,as the non pressure does, this type uses a 45m~60m copper coil.

Heat exchanger inside the tank provides more than 1.5m2 of heat transfer area. When water flows through the coil it absorbs heat from the water inside the solar collector tank. The solar collector tank is therefore a thermal store.

Advantage:

1) The material of the outer tank is SUS304 2B stainless steel. The material of the inner tank is SUS316 stainless steel.

2) The life of the vacuum tubes is 15 years.

3) Stable and reliable performance, well resistance.

4) Temperature when exposed to sun without water: 250°C, 2.5 hours to boiling point if using single tube.

5) It resists 25mm hail.

6) Heat preservation: 72 hours.

7) optional accessories: assistant tank, electric heater

8) 5 years warranty.

MODEL			YJR-SP 58/1800-20
Volume of storage tank			200 litres
Number of tubes			20 x 58mm x 1800mm
Storage tank			316 stainless steel 1.2mm thickness
Outer tank			304 stainless steel   0.5mm thickness
Insulation			Bayer polyurethane foam average thickness 55mm
Frame			304 stainless steel 1.2mm electrostatic painted
Frame angle			10-40 degree low frame
Inlet / outlet connections			¾” / 20mm
Maximum tank pressure			75kpa
Pressure temp valve			None required
Electric booster			2000w
Gas booster			Bosch 21 solar compliant (optional)
Frame foot print			2552mm L x 2210mm W   low frame
System weight Wet			295 KGs

200 Litre Evacuated Tube Solar Hot Water Heat Exchange System